OMNI Grout Additive Sealer 48 oz

OMNI Grout Additive Sealer can be used for interior and exterior application. This sealer is great for both sanded and Non-Sanded cement Grouts. OMNI Grout Additive Sealer has a Built-in stain protection against Water-Based and Oil-Based Contaminates. The OMNI Grout Additive Sealer will make your cement grout denser and stronger and future maintenance easier. Your new Additive Sealer allows moisture vapor transmission.

Grout Additive Sealer Application

- Follow Grout Manufacturer's Mixing Instructions; Simply use Grout Additive Sealer in place of water or liquid latex additive.
- Gradually Mix Grout Additive Sealer with dry cement grout powder to achieve desired consistency. Begin by pouring most, but not all of the Grout Additive Sealer into mixing bucket. Then add most, but not all cement grout powder. Avoid breaking dust, mix well, preferably at low speed. Add remaining Grout Additive Sealer and/or remaining grout powder to achieve desired consistency and continue mixing. Once grout is mixed to desired consistency, allow grout to sit for at least 10 minutes, and then remix
- Follow Grout Manufacturer's grout installation instructions using as little cleanup water as possible. -Wipe surface completely dry using clean, dry cotton or micro-fiber cloth towel.

Omni Grout Additive Sealer Mixing Ratio

- 48 ounces Grout Additives can be used to 10 Pounds of dry non-sanded cement Grout

For all of your Grout Cleaning needs OMNI offers whole line of Grout Cleaning products.

Omni Grout Additive Sealer is the perfect sealer. Order some today!