Arboritec Satin Oil Maintenance - Liter bottle

Arboritec Satin Oil Maintenance is an oiled surface treatment when floors have a grey or dirty look which no longer can be refreshed by regular cleaning. Use this oiled wood floor maintenance product on all kinds of oiled floors; natural oils, 2 component oils and hard wax oils. This oxidative hardening maintenance oil is fast drying and has low odor. Arboritec Satin Oil Maintenance be used on all kinds of oiled floors: natural oils, 2 component oils and hard wax oils. Each Liter bottle can cover approximately 1000 square feet.

Before using Aboritec oiled wood floor maintenance product, the surface must be cleared of all loose particles which could otherwise damage the floor. The temperature of the room, the floor and material must be between 59 degrees and 86 degrees Fahrenheit. If you are using the oiled wood floor care on floors with under floor heating systems, it must be switched off in good time before use. Protect the oiled wood floors from direct sunlight before, during and after application.

Arboritec Satin Oil Maintenance Instructions for Slightly Soiled Floors:
- Work in small areas at a time
- Apply Arboritec Satin Oil sparingly on the surface and work it into the wood with a cotton cloth or a buffer with a white pad
- Continue buffing until the floor appears to be saturated and no more drops of the oiled wood floor care are visible
- Replace dirty cloths or pads as needed
- Allow a minimum of 3 hours drying time before use (preferably overnight)
- Do not use the floor during the drying time

Arboritec Satin Oil Maintenance Instructions for Heavily Soiled Floors:
- Apply Arboritec oiled wood floor maintenance generously and work it into the wood with a red pad
- If the red pad does not give you a desired effect, gradually increase the abrasion level of the pads
- Clean off dirty oil completely from floors
- When floor appears to be clean and saturated, apply a new thin layer of Arboritec Satin Oil Maintenance and buff with a white pad until no more drops or smears appear
- Allow a minimum of 3 hours drying time before use (preferably overnight)
- Do not use the floor during the drying time

Please Note: Oil soaked pads and cloths can self-ignite. Store used materials in water or in closed containers.

For future cleanings of all the floors in your home, browse our full line of Floor Cleaning Supplies.